Enforce your AWS Network Firewall protections at scale with AWS Firewall Manager

As you look to manage network security on Amazon Web Services (AWS), there are multiple tools you can use to protect your resources and keep your data safe. Amazon Virtual Private Cloud (Amazon VPC), security groups (SGs), network access control lists (network ACLs), AWS WAF, and the recently launched AWS Network Firewall all offer points of protection for your AWS workload. Managing these security controls directly works well when everything is in a single or small number of accounts. However, if you’re part of a security team managing controls on a larger number of accounts, or part of a compliance team whose responsibility includes auditing and remediating application configurations owned by other teams, managing these controls at scale could become cumbersome. To make sure that it doesn’t become so for you, we’re going to walk you through how to manage the new AWS Network Firewall at scale using AWS Firewall Manager.

First, a primer on the new Network Firewall. Network Firewall is a stateful, managed, network firewall and intrusion detection and prevention service for traffic in Amazon VPC. With Network Firewall, you can filter traffic going to and coming from an internet gateway, NAT gateway, or over VPN or AWS Direct Connect using both stateful and stateless rules. The network firewall inspects individual packets by using a stateless rule processing engine and inspects packets in the context of their workflows by using a stateful rule processing engine. The stateless rules engine takes rules with standard 5-tuple connection criteria. The stateful engine takes rules compatible with Suricata. These capabilities enable you to add more advanced, packet payload–level protections for your VPC resources.

In this post, you will learn how to create, configure, and maintain Network Firewall firewalls with common security policies across appropriate accounts and VPCs in your AWS Organizations structure by leveraging Firewall Manager.

Firewall Manager prerequisites

You must complete the following prerequisites before you create and apply a Firewall Manager policy:

  1. AWS Organizations: Your company must be using AWS Organizations to manage your accounts, and All Features must be enabled. For more information, see Creating an organization and Enabling all features in your organization.
  2. A Firewall Manager administrator account: You must designate one of the AWS accounts in your organization as the Firewall Manager administrator. This gives the account permission to deploy security policies across the organization.
  3. AWS Config: You must enable AWS Config for all of the accounts in your organization so that Firewall Manager can detect newly created resources. To enable AWS Config for all of the accounts in your organization, use the Enable AWS Config template from the StackSets sample templates.
  4. AWS Resource Access Manager (AWS RAM): You must enable AWS RAM for all accounts in your organization so that Firewall Manager can modify the Network Firewall configurations.

Architecture diagram

Figure 1 shows an example organizational structure in AWS Organizations, with several organizational units (OUs) that we’ll use in the example policy sets in this blog post.

Figure 1: Best practices OU structure for AWS Organizations

Figure 1: Best practices OU structure for AWS Organizations

Firewall Manager can be associated to either the AWS primary payer account or one of the member AWS accounts that has appropriate permissions as a delegated administrator. Following the best practices for organizational units, we use a dedicated Security Tooling AWS account (named Security in the diagram) to serve as the Firewall Manager administrator from within the Security OU. The Security OU is used for hosting security-related access and services. The Security OU, its child OUs, and the associated AWS accounts should be owned and managed by your security organization.

This post will focus on two of the accounts in this organization. The first account is the Security Account, since this is where the Firewall Manager Administrator is defined. The second account we will focus on is Tenant 5 in the Staging OU. If you are following these steps, make sure the first account you are signed in to is the Firewall Manager administrator for your organization. You can do this by verifying the Administrator account ID in the Firewall Manager console under Settings. If you don’t have an administrator set, you can find the steps to set one in the Firewall Manager documentation.

Deployment of network firewalls and security policies

Managing security policies begins inside the WAF & Shield console under the AWS Firewall Manager heading. When you navigate from the console and select Firewall Manager, it will bring you to the Getting Started page. You can confirm that you’ve completed the prerequisites mentioned earlier in this post. If the prerequisites aren’t met, use the links in the Prerequisites section to complete the necessary steps. It’s important to note that Network Firewall is the first integration to require the AWS Organizations management account to have AWS RAM enabled. You can find more information about how to do that in the AWS RAM Sharing Your Resources documentation.

AWS Firewall Manager offers multiple security policy types for each service that it manages. A Firewall Manager security policy is a set of configurations that a security administrator defines, including relevant rules, protections, and actions that must be deployed and the accounts and resources (indicated by tags) to include or exclude. With the ability to create a different security policy for each AWS managed service, you can create granular and flexible configurations while still being able to scale control out to large numbers of accounts and VPCs. These policies automatically and consistently enforce the rules you configure even when new accounts and resources are created. For this post, we will focus on the Network Firewall policy type in the Firewall Manager console.

Security policy part 1: Defining a security policy’s rules

The Network Firewall policy type is a regional construct (meaning it applies to one Region only) comprised of stateless rule groups, a policy scope, and policy tags. When you first pick the type of policy in the Firewall Manager security policy console, you also choose the Region you want the policy to apply to. Once you’ve picked your Region, you can configure your policy with a policy name and a Network Firewall policy. This is where you pick the stateless and stateful rule groups and default actions for packets that don’t match any rules, as shown in Figure 2. If you try to add rule groups but none populate the window, this can either mean that you didn’t define any rules and rule groups for the network firewall, or you created them in a different Region. You can choose the link in the window to go to the Network Firewall page to create or import rules.

If you’re interested in some rules to test, importing rules from https://rules.emergingthreats.net/open/suricata/rules/ is one place to start. These rules are some examples, such as bad IP lists and known malicious DNS hosts, that—with minimal modification—can be imported in your network firewall. You can import stateful rules by using the console, API, or command line interface. For more information on writing your own rules, see the Network Firewall rule documentation.

Additionally, the capacity units for each rule is shown in the interface. Capacity units refer to the total amount of capacity each individual rule allocates towards a total limit for a rule group, and are subject to service quotas. You can find more information on capacity units in the Network Firewall capacity documentation. If you want the same policy to apply to multiple Regions, using AWS CloudFormation StackSets and an infrastructure-as-code approach helps you deploy a policy in each Region. Your CloudFormation template would include the Network Firewall rules, rule group definitions, and security policies.

Figure 2: Defining rule groups for Network Firewall security policy

Figure 2: Defining rule groups for Network Firewall security policy

The next section of the console relates to the configuration of the network firewall. There are two different configuration areas, shown in Figure 3, and once they’re configured they cannot be changed. The first configuration relates to the number of firewall endpoints. This impacts both the cost and availability of the network firewall. Situations where a single network firewall in a single Availability Zone provides adequate availability for the environment could include test or demo environments, applications or workloads that are built solely in a single Availability Zone, or environments where low cost is the driving factor. For environments where high availability is required, applications or workloads are built across multiple Availability Zones, or designers want to reduce cross Availability Zone traffic or dependencies, it’s recommended to use multiple firewall endpoints. To better understand this tradeoff for your workloads, the AWS Well-Architected Framework is the best place to learn more about designing for reliability and cost optimization as well as security, operational excellence, and performance.

The second configuration element is the available Classless Inter-Domain Routing (CIDR) blocks to use for the Network Firewall subnets when they are being created. This optional field should have the /28 subnet you intend to have pulled from the VPC CIDR block as part of the creation of the network firewall. This comes in handy if VPCs in an organizational account follow consistent IP addressing practices, and it will allow more intuitive design guidelines and implementations. You can find more information on how the CIDR blocks are used in the Firewall Manager documentation for security policies. If this field is left blank, Firewall Manager will take a best-effort approach to find unassigned CIDR blocks in your VPCs to create a subnet for Network Firewall. If no CIDR blocks are available, Firewall Manager will display a non-compliant error on its dashboard.

Figure 3: Defining Network Firewall resiliency policy

Figure 3: Defining Network Firewall resiliency policy

At this point, you’ve defined the Network Firewall security policy’s rules; the next step is to define what the policy should apply to.

Security policy part 2: Defining the security policy scope

Now that you’ve defined the security policy rules, the policy should be scoped to apply only to the appropriate accounts and VPCs. It’s important to note that for each security policy, there will be one Network Firewall instantiation. Therefore, if you apply multiple security policies to an account or to a VPC, multiple firewalls will be created, leading to inefficient routing, cost, and complexity. Firewall Manager doesn’t merge proposed configurations into network firewalls created outside the Firewall Manager framework. Firewall Manager can, however, update or change the configuration of firewalls it manages at any time. Therefore, it’s best to architect your policies with your organizational structure in mind.

Firewall Manager enables you to modify all accounts and resources in an organization, or tailor a policy scope to specific OUs and resources. The architecture diagram in this blog post outlined a practical scenario for how you can structure OUs. Considering security policies, it would be reasonable for network firewalls to have different policies in a Production OU that impacts Tenants 1 and 2, compared to the Sandbox OU for Tenants 7 and 8. However, you might have some commonality between the Pre-prod and Staging OUs. So, for example, you might want to apply the same Network Firewall rules groups across an organization, as shown in Figure 4.

Figure 4: Applying rule groups to an AWS Organizations OU structure

Figure 4: Applying rule groups to an AWS Organizations OU structure

To do this, you would create three different Firewall Manager security policies inside the Security Account in the Security OU:

  • Prod Environment Policy
    • Contains rule group “Block-Known-Bad-IPs” and “Block-BadDNS”
    • Applies to Prod OU
  • Dev Environment Policy
    • Contains rule group “Block-Known-Bad-IPs” and “Block-Corporate-Prod”
    • Applies to Pre-prod OU and Staging OU
  • Sandbox Environment Policy
    • Contains rule group “Block-Known-Bad-IPs”
    • Applies to Sandbox OU

This policy application is shown in Figure 5.

Figure 5: The corresponding security policy application

Figure 5: The corresponding security policy application

In addition to applying the security policy to accounts in OUs, it is also possible to filter based on the tags associated with VPCs in the accounts, as shown in Figure 6. For example, if your accounts contain a VPC with bastion hosts, enforcing the same routing and outbound traffic policies could break other security elements. In these cases, tagging the VPC with a consistent identifying key pair such as “Bastion-VPC:True” would enable Firewall Manager to exclude that subnet from requiring a path through the network firewall.

Figure 6: Defining the security policy scope by organization unit and tagging

Figure 6: Defining the security policy scope by organization unit and tagging

Security policy part 3: Defining the security policy tags

As part of your Firewall Manager security policy, you should also define policy tags. These tags can be used for multiple purposes, including adding context, defining ownership, or even authorizing changes by using attribute-based authentication with IAM. This step is optional, but recommended to improve the operations. Some recommended tags include:

  • Policy description: A longer description to capture the purpose of the policy
  • Policy owner: A contact person for when changes to the policy must be made
  • Cost Center: Where costs associated with the security policies should be incurred
  • Last date edited: Enables you to keep track of changes to the policy and map the changes back to a change log or ticketing system
  • Last date reviewed: Helps maintain an audit schedule to verify that appropriate policy is set and audits mandated by compliance regimes are easily captured

Your organization might have other tags that are also mandated, and these can be configured upon policy creation as well.

Once you’ve defined the appropriate tags, you can review the policy before Firewall Manager puts your policy into effect. It’s important to also note that when you choose Create Policy, Firewall Manager creates AWS RAM configurations and AWS Config rules to enable management and visibility for the Firewall Manager Administrator account, and the member accounts will incur the associated costs.

After the Network Firewall deployment

Now the Firewall Manager policy has been created. On the AWS Firewall Manager policies screen, shown in Figure 7, you’ll see the total number of accounts that are encompassed by the OU selection and tag filters you created, and the number of accounts that are fully compliant with the policy. Because this is a new policy, Firewall Manager must evaluate the status of the accounts before deeming them compliant or noncompliant. Another benefit of this view is the ability to report on ongoing compliance with any given policy. Remember how AWS Config is a prerequisite for Firewall Manager? That’s because AWS Config enables Firewall Manager to access information about the current state of the firewalls and VPCs in each account and report back and/or enforce compliance with the policy on an ongoing basis.

Figure 7: Validating compliance of accounts by policy

Figure 7: Validating compliance of accounts by policy

In the background, Firewall Manager is building the components required for the network firewalls in each account. This includes the dedicated firewall subnet, the associated route tables in each specific VPC, and then the firewall itself. Once these tasks are completed, Firewall Manager pushes the rule groups defined in the security policy. If a network firewall already exists, Firewall Manager will still follow the same steps and create additional subnets, route tables, and firewalls in the VPCs. Remember, as we mentioned earlier, that Firewall Manager doesn’t update or change the configuration for network firewalls it didn’t create.

Once the resources are built, it can take a couple of minutes for the accounts to be evaluated and appropriately classified in the Firewall Manager console. After the accounts have been evaluated, selecting the name of the Firewall Manager security policy shows which accounts are within the policy scope, their status, and any relevant details. If Firewall Manager identifies any noncompliant events, statuses, or policies, this area of the console is also where those alerts will appear. For a detailed list of possible event types, the Firewall Manager documentation can provide more information.

If you look under Policy Action there is an important informational box, shown in Figure 8.

Figure 8: Information box that identifies necessary route table update actions

Figure 8: Information box that identifies necessary route table update actions

Firewall Manager creates the network firewall in the defined accounts, but it doesn’t automatically modify the route tables inside the VPC. This ensures that changes being made by the central security team don’t impact other activities that may be going on in the accounts. Consider a situation where the account is owned by the DevOps team and security is owned by the central Security team. This situation makes it possible for the Security team to roll out the new network firewall without impacting the network path of the application. Once the firewall is deployed, the Security team can engage the DevOps team to push the routes into production through the appropriate code pipeline. Steps to modify the route tables can be found in the blog post that covers the deployment models for AWS Network Firewall.

Conclusion

In this blog post, you learned how security administrators can use Firewall Manager to create security policies for the new Network Firewall service and push them out at scale to their organization. As part of that walkthrough, you also learned how compliance auditors can use Firewall Manager to see, in a single place, the compliance of each account with that policy. In the end, by having AWS do the undifferentiated heavy lifting of deploying resources and collecting state at scale, security teams can focus less on operational burdens and more on strategic opportunities. For further reading and updates, see the Firewall Manager Developer Guide. To learn about pricing for solutions using AWS Firewall Manager, check the AWS Firewall Manager pricing page for examples.

If you have feedback about this post, submit comments in the Comments section below. If you have questions about this post, start a new thread on the AWS Firewall Manager forum or contact AWS Support.

Want more AWS Security how-to content, news, and feature announcements? Follow us on Twitter.

Author

Michael Wasielewski

Michael is a security and compliance specialist for Amazon Web Services (AWS) in North America. Michael’s background in network engineering and enterprise architecture as well as information security means you can often hear him rant about the operational burden and nirvana states of security.